Exterior Cleaning Guide

Can You Pressure Wash a Roof?

You can, and it is one of the most expensive mistakes made on a house, because the damage is permanent and does not show up until later.

The short answer

A pressure washer will clean a roof, and it will also take years off it. Asphalt shingles are protected by mineral granules embedded in the surface during manufacture. Those granules block UV, and once they are gone the asphalt underneath degrades quickly. High pressure removes them in quantity. That is not a risk of doing it wrong, it is what happens when it is done at all.

How to tell it has already happened

Look in the gutters and at the base of the downspouts after any roof work. A layer of coarse dark grit means granules came off. Some granule loss is normal over a roof life, but a visible accumulation right after a wash is not weathering, it is damage. Bare patches, a shinier look in places, and shingle edges that have lifted are the other signs.

Most manufacturer warranties exclude damage from pressure washing, so it is worth checking yours before letting anyone near the roof with a machine.

The other damage

Granule loss is the headline, but not the only issue. Shingles are designed to shed water flowing downward. Spraying up under the courses drives water the wrong way, past the shingle and onto the deck below, where it can reach the underlayment and the sheathing. Around flashing, vents, and valleys the risk is higher still. On older shingles that have gone brittle, pressure can crack them or lift them off their seal.

What the dark streaking actually needs

The black streaking is algae, a living organism rooted in the shingle surface. Force removes what is visible and leaves the roots, so it comes back quickly. A cleaning solution kills it, which is both gentler and longer lasting. A soft wash applies that solution at roughly garden hose pressure, gives it time to work, then rinses gently.

The roof continues to lighten for a week or two afterwards as rain carries the dead growth off. Expecting an instant result is what pushes people toward pressure in the first place.

Metal, tile, and slate

Shingles are the common case but not the only one. Metal roofs can be damaged around seams and fixings and the coating can be dulled. Clay and concrete tiles crack and dislodge under pressure, and walking a tile roof causes more breakage than the washing does. Slate is brittle and expensive to repair. All of them are soft wash surfaces.

What we do

We soft wash roofs. We do not pressure wash them, on any material, and we protect the planting below before the solution goes on. Call (504) 688-3995 for a free written estimate.

Related Service

Would rather we handled it?

Common Questions

Can You Pressure Wash a Roof?: the questions we get asked.

Will pressure washing void my roof warranty?
Most shingle manufacturer warranties exclude damage caused by pressure washing. It is worth reading yours before anyone puts a machine on the roof, because the exclusion usually applies whoever did the work.
How do I know if my roof lost granules?
Check the gutters and the base of the downspouts. Coarse dark grit accumulating right after a wash is granule loss rather than normal weathering. Bare or shinier patches on the shingles are the other sign.
Can a metal or tile roof be pressure washed?
They should not be either. Pressure can damage metal around seams and fixings and dull the coating, and it cracks clay and concrete tiles. All of them are soft wash surfaces.
How long does a roof take to look clean after soft washing?
It keeps improving for a week or two. The solution kills the algae and rain gradually carries the dead growth off, so the roof will not look finished the day the work is done.
More Guides

Other surfaces, other methods.

Rather not do it yourself?

Free written estimate before any work starts.