16 Guides, No Guesswork

Exterior Cleaning Guides

Straight answers on removing stains, cleaning siding and roofs, and knowing when a surface needs pressure and when it needs a soft wash.

How to clean it, and when to leave it alone

Most exterior cleaning goes wrong in the same way: the right cleaner used at the wrong pressure, or the right pressure used on the wrong surface. These guides cover what actually lifts each type of stain, which surfaces tolerate a pressure washer, and which ones need a low-pressure soft wash and a cleaning solution instead.

They are written from work across the New Orleans metro, where humidity keeps organic growth coming back faster than it does in drier climates. If you would rather have it handled, we give a free written estimate before any work starts. Call (504) 688-3995.

16 Guides

Pick the surface you are dealing with

How to Prepare for a Pressure Washing Visit

Twenty minutes of preparation before the crew arrives puts the whole visit into the work instead of into moving cars…

Read the guide

How to Remove Oil Stains From a Driveway

Oil sinks into concrete instead of sitting on it, so lifting a stain is about pulling oil back out of…

Read the guide

How to Remove Rust Stains From Concrete

Rust is a metal oxide bonded into the concrete, which is why degreasers do nothing to it and why the…

Read the guide

How to Clean Composite Decking

Composite does not rot, but it does grow mould in its surface texture, and it is easy to void the…

Read the guide

How to Clean Pavers

Pavers clean up well, but the joint sand between them is the part that decides whether the patio still looks…

Read the guide

Pressure Washing Vinyl Siding

Vinyl siding is one of the easiest surfaces to clean and one of the easiest to damage, because the danger…

Read the guide

Soft Wash vs Pressure Wash: Which Does Your Surface Need

The choice is not about how dirty something is. It is about whether the surface can take force, and whether…

Read the guide

Black Streaks on a Roof: What They Are and How to Remove Them

Those dark streaks are a living algae feeding on the limestone filler in your shingles, which is why they spread…

Read the guide

How to Clean a Concrete Driveway

A concrete drive takes pressure better than almost anything else on a property, which is exactly why so many end…

Read the guide

What Affects the Cost of Gutter Cleaning

Gutter cleaning is priced on access and linear footage more than on how dirty the gutters are, which is why…

Read the guide

What Affects the Cost of Pressure Washing

Surface area is only part of it. The method a surface requires usually moves the number more than its size…

Read the guide

Can You Pressure Wash a Roof?

You can, and it is one of the most expensive mistakes made on a house, because the damage is permanent…

Read the guide

Mold and Green Algae on Vinyl Siding

Green film and black spotting on siding are two different organisms, and the black one does not come off with…

Read the guide

How to Clean Stucco Without Damaging It

Stucco is porous, brittle at the surface, and sits over a moisture barrier, which makes it one of the least…

Read the guide

How to Clean a Brick House

Brick tolerates more pressure than most exteriors, but the mortar between it does not, and mortar is what fails first.

Read the guide

How Often Should You Pressure Wash Your House?

In a humid climate the answer is driven by shade and tree cover far more than by a calendar, and…

Read the guide
Why It Matters

Most exterior cleaning damage is method, not effort

The same machine that cleans a driveway will strip a roof, fur a composite deck, and drive water behind vinyl siding.